All insights
EU import compliance
3 min read

Long-chain PFAS in the EU: why a passed test report may no longer be enough

From 16 December 2026, wider EU restrictions on long-chain PFAS mean buyers need to check which substances a supplier’s test report covers and whether it reflects production materials.

From 16 December 2026, the EU will restrict a wider group of long-chain PFAS chemicals in products placed on the market, including imported goods. For buyers sourcing coated textiles, electronics or fluoropolymer-based products from China, a test report that passed earlier requirements may not cover everything required under the new rule.

Commission Delegated Regulation (EU) 2026/1972 was published on 12 November 2026. It adds long-chain perfluorocarboxylic acids, known as C9-C21 PFCAs, their salts and related compounds to the EU POPs Regulation.

The rule applies from 16 December 2026. From that date, the manufacture, placing on the market and use of these substances are prohibited, including when they are present in mixtures or finished articles, subject to specified limits and exemptions.

What has changed?

C9-C14 PFCAs have already been restricted under REACH, and some suppliers hold test reports covering these substances. The new rule extends the scope to C15-C21 PFCAs.

That distinction matters when reviewing a supplier’s documents. A report showing that the tested C9-C14 substances passed does not establish whether C15-C21 substances are present, or whether the product meets the new requirements for related compounds.

The general limits for unintentional trace contamination are:

  • 0.025 mg/kg for the sum of C9-C21 PFCAs and their salts.
  • 0.26 mg/kg for the sum of related compounds, including substances that can degrade or transform into these acids.

There are specific exemptions and different limits for certain applications. These include particular fluoroplastics, fluoroelastomers and PTFE micropowders, for which separate limits apply until 16 December 2030 and lower limits apply to the full C9-C21 group from 17 December 2030.

Does the existing test cover the right substances?

The regulation does not prescribe a specific analytical method. A test report needs to be checked for the substances actually tested, the relevant limits and whether the tested sample represents the material used in production.

A report labelled “PFAS compliant” or “REACH compliant” is not enough on its own to answer those questions.

For relevant products, we would ask the supplier:

  • Which C9-C21 PFCAs, salts and related compounds were included in the test?
  • Do the laboratory’s reporting limits allow the results to be assessed against the applicable legal limits?
  • Does the tested sample reflect the materials and coatings used in the current production order?
  • Has the material or coating supplier changed since the test?

Where the report does not provide a clear answer, the next step is to discuss the appropriate testing scope with a qualified laboratory. Depending on the product and the available evidence, testing representative production material before shipment may be easier than resolving the issue after arrival.

What about goods already on the way?

Goods leaving China in the second half of November could arrive close to or after the application date. Buyers should check their compliance before shipment rather than assume that an earlier order or departure date settles the question.

The regulation also allows continued use of articles containing C15-C21 PFCAs that were already in use in the EU before 17 December 2026. This is an exemption for continued use; it should not be assumed to cover unsold stock. The position of existing inventory depends on the circumstances and should be checked separately.

At Berg, we look at chemical compliance as part of the supplier enquiry, not just as a document to collect at the end. That includes checking what a report covers and whether it reflects the materials that will actually be used in production.

Official sources